Documents

 All documents are in the Adobe Acrobat (.pdf) format and require Acrobat Reader. This reader is available for free from Adobe.

 download Reader

To the right of each document name is a PDF icon. Left clicking on the icon will open the document in a separate window. You can also right click on the icon and select "Save Target As..." to save the document on your PC.
   
12V DC Power Source Regulator  
bullet

Instructions

Block Animator/2  
bullet

BA/2 instructions for 3-light LED (common anode) and
searchlight signals; covers detection using photocells, infrared components or external detectors

bullet

BA/2-SBCA instructions for Tomar semaphore motors, 3-light bulb-based signals, Pennsy/B&O-type bulb-based signals, Pennsy/B&O-type LED-based signals wired with Common Anode; covers detection using  photocells, infrared components or external detectors

bullet

BA/2-CC instructions for 3-light or Pennsy/B&O-type LED-based signals wired with Common Cathode; covers detection using photocells, infrared components or external detectors

bullet

Instruction Supplement (covers interlocking with turnout position and alternate signal placement); detection using photocells

bullet

Instruction Supplement (covers interlocking with turnout position and alternate signal placement); detection using infrared

bullet

Application note on using the Block Animator with the BLMA signal bridge; detection using photocells

bullet

Application note on using the Block Animator with the BLMA signal bridge; detection using infrared


CTC Panel  
bullet Converting a 3-position into a 2-position rotary switch for CTC panels
bullet 3-color LED Panel Repeater Signal
bullet Red Block Occupancy LEDs
bullet Yellow Block Occupancy LEDs
bullet White Block Occupancy LEDs
bullet Green Switch & Signal LEDs
bullet Yellow Switch & Signal LEDs
bullet Red Switch & Signal LEDs

Fast Clock Repeater - NCE  
bullet FCR-N manual
bullet FCR-NL ( Large version) manual
Fusee Pro and Fusee Pro/M  
bullet Fusee Pro Instructions
bullet Fusee Pro/M Instructions
Grade Crossing Pro/2  
bullet GCP/2 instructions; covers detection using photocells, infrared components or external detectors
bullet GCP/2 Expander instructions; covers detection using photocells, infrared components or external detectors
bullet GCP/2 grade crossing bell module instructions
bullet Servo motor kit instructions
bullet

Application note on manually triggering the Grade Crossing Pro with a simple switch or external circuit

bullet

Application note on handling complex grade crossings where turnouts are involved (e.g. spurs, crossovers)


LCC Fast Clock  
bullet LCC-FC User's Guide
bullet LCC-FC-L (Large version) User's Guide

Light EFX-16  
bullet Light EFX-16 User's Guide
bullet Light EFX-16 (High Current) User's Guide
bullet Light EFX-16 input board instructions
bullet Light EFX-16 application note: Using our LocoNet Fast Clock's event triggers
bullet Light EFX-16 Output Adapter instructions
bullet Light EFX-16 relay board instructions

LocoNet Fast Clock  
bullet LNFC User's Guide
bullet LNFC-L (Large version) User's Guide

Signal Animator/2  
bullet

SA/2 instructions for 3-light LED (common anode) and
searchlight signals; covers detection using a photocell, infrared components or an external detector

bullet

SA/2-SBCA instructions for Tomar semaphore motors, 3-light bulb-based signals, Pennsy/B&O-type bulb-based signals, Pennsy/B&O-type LED-based signals wired with Common Anode; covers detection using a photocell, infrared components or an external detector

bullet

SA/2-CC instructions for 3-light or Pennsy/B&O-type LED-based signals wired with Common Cathode; covers detection using a photocell, infrared components or an external detector

bullet

Instruction Supplement (covers interlocking with turnout position, 2-light LED signals, implementing a semi-prototypical block signal setup, minimizing electrical noise from other sources and using across-the-track infrared instead of a photocell)

bullet

Instruction Supplement (covers interlocking with turnout position, 2-light LED signals, implementing a semi-prototypical block signal setup); detection using infrared components


Signal Tester  
bullet Instructions
 Discontinued products

Block Animator (ORIGINAL versions; green circuit board)  
bullet

BA-1 instructions for 3-light LED (common anode) and
searchlight signals; detection using photocells

bullet

BA-1-IR instructions; detection using infrared

bullet

BA-2 instructions for searchlight signals constructed with a single 2-lead or 3-lead bipolar LED OR three individual Green, Yellow and Red LEDs (common anode); detection using photocells

bullet

BA-2-IR instructions; detection using infrared

bullet

BAD-SBCA instructions for Tomar semaphore motors, 3-light bulb-based signals, Pennsy/B&O-type bulb-based signals, Pennsy/B&O-type LED-based signals wired with Common Anode; detection using photocells

bullet

BAD-SBCA-IR instructions; detection using infrared

bullet

BAD-CC instructions for 3-light or Pennsy/B&O-type LED-based signals wired with Common Cathode; detection using photocells

bullet

BAD-CC-IR instructions; detection using infrared

bullet

IR Upgrade Kit instructions (converting a photocell-based Block Animator to an infrared-based one)

bullet

Application note on using the Block Animator with current-sensing occupancy detectors instead of photocells

bullet

Application note on using the Block Animator with IRDOT-1 IR detectors instead of photocells


Grade Crossing Pro (ORIGINAL versions; green circuit board)  
bullet

GCP instructions; detection using photocells

bullet

GCP-IR instructions; detection using infrared

bullet Application note on using the ORIGINAL GCP with current-sensing occupancy detectors instead of photocells
bullet

Application note on using the ORIGINAL Grade Crossing Pro with IRDOT-1 IR detectors instead of photocells

bullet

Application note on using the ORIGINAL Grade Crossing Pro with Tam Valley Depot's Singlet servo driver board for crossing gates

bullet

IR Upgrade Kit instructions (converting a photocell-based ORIGINAL Grade Crossing Pro to an infrared-based one)

bullet

Interfacing an ORIGINAL GCP to Innovative Train Technology’s bell modules (covers many versions )


Signal Animator (original versions; has jumper blocks not switches on the board)  
bullet

SA-1 Instructions for 3-light LED (common anode) and
searchlight signals; detection using a photocell

bullet

SA-1-IR instructions; detection using infrared components

bullet

SAD-SBCA Instructions for Tomar semaphore motors, 3-light bulb-based signals, Pennsy/B&O-type bulb-based signals, Pennsy/B&O-type LED-based signals wired with Common Anode; detection using a photocell

bullet

SAD-SBCA-IR instructions; detection using infrared components

bullet

SAD-CC Instructions for 3-light or Pennsy/B&O-type LED-based signals wired with Common Cathode

bullet

SAD-CC-IR instructions; detection using infrared components

bullet

Random Signal Animator supplement; detection using a photocell

bullet

Random Signal Animator supplement; detection using infrared components

bullet

Application note on using the Signal Animator with IRDOT-1 IR detectors instead of photocells

bullet

IR Upgrade Kit instructions (converting a photocell-based Signal Animator to an infrared-based one)


Infrared Application Notes  
bullet Across-the-rail infrared detection for the ORIGINAL Grade Crossing Pro, Block Animator, Signal Animator and Optical Detector. Does NOT apply to the Signal Animator/2, Block Animator/2 or the Grade Crossing Pro/2.

Optical Detector  
bullet

OD-1 instructions; detection using a photocell

bullet

OD-1-IR instructions; detection using infrared components